WINNER ANNOUNCED - July Competition

All the latest news and announcements from XCore and XMOS.
gruetzkopf
Newbie
Posts: 1
Joined: Sat Jul 12, 2014 11:02 pm

Post by gruetzkopf »

Interface to real railroad interlocking equipment to connect it to a model of the railway that was once controlled by it.
etabeta00
Newbie
Posts: 1
Joined: Sun Jul 13, 2014 7:06 pm

Post by etabeta00 »

Use this bord to create audio test for mass production
Arec
Newbie
Posts: 1
Joined: Sun Jul 13, 2014 11:22 pm

Post by Arec »

Hardware host synthesizer with interchangeable software plugins, which allows you to upload different types of synthesis - VA, FM, PD, Wavetable ...
mmsk
New User
Posts: 3
Joined: Mon Jul 14, 2014 2:52 am

Post by mmsk »

A Portable ECG Monitor and Analyzer with real-time algorithms for automated ECG signal analysis and interpretation.
User avatar
Martin581
Newbie
Posts: 1
Joined: Mon Jul 14, 2014 3:44 am

Post by Martin581 »

32bit/384K Audio module.
grzeziek
Newbie
Posts: 1
Joined: Mon Jul 14, 2014 8:42 am

Post by grzeziek »

Real-time controller for industrial grade 6-axis robot with integrated collision detection system
adalbert
Newbie
Posts: 1
Joined: Mon Jul 14, 2014 10:56 am

Post by adalbert »

Program based on neural network principle of several neural layers to be computed parallelly (thanks to 16 cores of XCORE) to precise control my DIY SEGWAY-like or WHELIE self balancing vehicle enabling to adapt to changing load
User avatar
DavidW
Active Member
Posts: 51
Joined: Mon Dec 16, 2013 3:23 pm

Post by DavidW »

As I should have guessed, it's meetings central here at XMOS HQ at the moment!

I will endeavour to get the winner's idea chosen soon, and the 10 runners up poll going ASAP.

Apologies for the delay.
User avatar
DavidW
Active Member
Posts: 51
Joined: Mon Dec 16, 2013 3:23 pm

Post by DavidW »

Just a quick update:

The winner and 10 runners up (to be entered into the poll) have been chosen and I have just Private Messaged the winner!

Once they respond to confirm, i'll formally announce them and open a new thread/poll for the runners up.

We'll delay the close of the poll so that it lasts 1 week.
User avatar
DavidW
Active Member
Posts: 51
Joined: Mon Dec 16, 2013 3:23 pm

Post by DavidW »

I can now happily say:
Congratulations BBenJ!!
BBenJ is the winner of our first USB sliceKIT round. Our runners up who will be entered into the second round community poll are:
  • Folknology
  • mhanuel
  • tshelley
  • AlexSousa
  • srpsco
  • tronicgr
  • rpflaum
  • guitinker
  • JasonWhiteman
  • grzeziek
This was BBenJ's project idea:

USB-based with autonomous capabilities (SD card), multi-plateform, multi-axis, high-speed and flexible CNC controller unit.

The winning project and 10 'runners up' were chosen by Matt Fyles, our Director of Software Tools Development.

Another thread will follow for the next round poll.