Hello all,
Which target device should I select in the xTIMEcomposer if I want to develop with XK-VF3100-C43 and XK-VF3500-L33-AVS?
I just begin studying programming with XMOS devices following example projects from xTIMEcomposer studio community edition. I had three boards:
1. XK-USB-MIC-UF216
2. XK-VF3100-C43
3. XK-VF3500-L33-AVS
With the XK-USB-MIC-UF216, I had no problem if I select the device as "XU-216-512-TQ128-I20" in the list of Makefile editor.
However, for the other two boards, I'm afraid I cannot find any corresponding target device in the list.
Best,
J
Development with XK-VF3100-C43 and XK-VF3500-L33-AVS
-
- Junior Member
- Posts: 6
- Joined: Tue Oct 31, 2017 9:44 pm
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
Interesting. Please raise a ticket using the XMOS.COM support portal and post your results after you receive a formal reply. Believe that the full details are still very secretive and may only be available under a mutual NDA along with proof of your purchase of the relevant kits.
-
- Junior Member
- Posts: 6
- Joined: Tue Oct 31, 2017 9:44 pm
Hi mon2,
Just FYI, they replied that all those three boards used the same chipset and I had to select the same one, "XU-216-512-TQ128-I20", for the second and the third boards.
I'll test it and see if it works.
Best,
J
Just FYI, they replied that all those three boards used the same chipset and I had to select the same one, "XU-216-512-TQ128-I20", for the second and the third boards.
I'll test it and see if it works.
Best,
J