Hi folks,
I am brand new to everything around Xmos.
No Board no nothing on my Desk till now, but reading a lot and close to a decision what will be ordered :D
I am living at this moment in Saudi Arabia and work there as Construction Manager (nothing about uCs there :geek: )
Never the less I have quite some (a bit rusty) uC experience and did even earn some money with transputer HW/SW designs. But that was looooong ago :roll:
What else to say?
I do not have a project yet and I am thinking about ordering an XC1A and an XK1A to have some thing to play with. As it is ages ago that I designed a board and there the chip dimension were a bit easier to handle I believe I will not yet step into that ;)
See you around folks
Frank
Hi and Hello
-
- Experienced Member
- Posts: 69
- Joined: Sat Apr 30, 2011 6:19 pm
-
- XCore Expert
- Posts: 577
- Joined: Tue Sep 08, 2009 5:15 pm
Hi Frank!
Thanks for the post, it is great to have you hear with us on XCore.com
Do let us know how you get on with your XC1A/XK1A.
Try the quick start tutorials first to understand the basics then I recommend thinking up a small project to take on as this will be even more fun as it has a real world purpose!
Thanks for the post, it is great to have you hear with us on XCore.com
Do let us know how you get on with your XC1A/XK1A.
Try the quick start tutorials first to understand the basics then I recommend thinking up a small project to take on as this will be even more fun as it has a real world purpose!