Hi,
I have downloaded I2S software component version 1.6.0 from page https://www.xmos.com/support/xsoftip?subcategory=Audio&component=module_i2s_master.
Unpacked archive contains 3 folders: sc_i2s, sc_i2c and sc_util.
When I add I2S Master Audio Driver to my configuration in xSOFTip and generate project I have only sc_i2s module code in xTIMEcomposer. No i2c and util.
Why sc_i2c and sc_util are in this archive?
By this token, information and datasheet on aforementioned webpage is about component ver 1.4.3, not 1.6.0.
Strange content of sc_i2s.zip(1.6.0).zip
-
ffomich
- Experienced Member
- Posts: 119
- Joined: Mon Sep 15, 2014 1:32 pm
-
srinie
- XCore Addict
- Posts: 158
- Joined: Thu Mar 20, 2014 8:04 am
Hi,
There seems to be an issue while reflecting the latest I2S component version - we ll look into this.
If you have downloaded the "Audio driver package" including I2C and sc_util components, I would suggest to use these components in the downloaded package rather than using them from xSOFTip explorer.
Hope this helps.
Regards,
Srini
There seems to be an issue while reflecting the latest I2S component version - we ll look into this.
If you have downloaded the "Audio driver package" including I2C and sc_util components, I would suggest to use these components in the downloaded package rather than using them from xSOFTip explorer.
Hope this helps.
Regards,
Srini