I try to use xSCOPE to trace data in my application based on xCORE-200 MC AUDIO evaluation board. I would like to use xscope_start() and xscope_stop() functions but application build always fails with the following error
xSCOPE initialisationxscope_probe_xlink.S:(.text+0x3e): Error: value 0x00000291 for relocation R_XCORE1_DP_REL6 is out of range
C:\Users\user\AppData\Local\Temp\sod_2: Error: relocation with respect to '__sodEnd'
Code: Select all
void xscope_user_init()
{
xscope_register(1,
XSCOPE_STARTSTOP, "Function1", XSCOPE_UINT, "Units"
);
xscope_config_io(XSCOPE_IO_BASIC);
}
Code: Select all
<Nodes>
<Node Id="2" Type="device:" RoutingId="0x8000">
<Service Id="0" Proto="xscope_host_data(chanend c);">
<Chanend Identifier="c" end="3"/>
</Service>
</Node>
</Nodes>
<Links>
<Link Encoding="2wire" Delays="4,4" Flags="XSCOPE">
<LinkEndpoint NodeId="0" Link="XL0"/>
<LinkEndpoint NodeId="2" Chanend="1"/>
</Link>
</Links>
Application is compiled with xTIMEcomposer 14.3.2
Thanks