StartKIT (XS1-U16A-128-FB217) with second ULPI

All technical discussions and projects around startKIT
Post Reply
mhelin
Active Member
Posts: 52
Joined: Fri Dec 24, 2010 10:54 am

StartKIT (XS1-U16A-128-FB217) with second ULPI

Post by mhelin »

Can I connect, I mean will it work, if I connect a USB ULPI PHY to the second tile, the only tile visible for users on StartKIT? I've read the XUD library uses some HW "acceleration" for USB, also I would need to use L-version of the core (U and 200 use the built-in PHY), and the XUD library documentation mentions pins X0D12 - X0D24 for the L-series.


User avatar
akp
XCore Expert
Posts: 578
Joined: Thu Nov 26, 2015 11:47 pm

Post by akp »

As long as you follow Appendix K of https://www.xmos.com/download/XS1-A8A-6 ... t(1.4).pdf it seems to me it should work. Unless XMOS disabled the UIFM for some reason, but they specifically state in Sec 2 of https://www.xmos.com/download/startKIT- ... l(1.3).pdf that "If you are using startKIT as a development platform and intend to run your final application on a commercially available single tile device, it may be helpful to review the XS1-A8A-64-FB96 Datasheet.

I haven't tried it and I don't have the hardware so take what I say with a huge grain of salt.
Post Reply