No Available Devices Found
-
- Active Member
- Posts: 40
- Joined: Wed Dec 18, 2013 11:51 am
I have finally narrowed down the USB connection for my StartKit now, basically I must plug it in, in command prompt type xrun -l (it wont find anything), go to device manager, right click on it and update it with driver of my choosing and use the driver that is known to work on Win 7, every time I plug the USB in I have to do this procedure, if I do not do xrun -l first I will have to repeat the driver update twice to get it to work.
-
- New User
- Posts: 3
- Joined: Sun Jan 26, 2014 4:51 pm
MatCat's procedure worked for me also under Win7. Thanks.
-
- New User
- Posts: 2
- Joined: Sat Mar 29, 2014 10:47 pm
i am also having this problem and solving it "temporarily" by unplugging an then reattaching - deleting - re installing driver...... was a fix found for this as its most annoying and i relay want to get down to playing with this dev board.
-
- Member
- Posts: 10
- Joined: Wed Jan 08, 2014 5:36 pm
For me http://sourceforge.net/apps/trac/libusb-win32/wiki (thanks to my friend Furman) made a difference. I was not able to get startKit + WiFi slice detected. StartKit alone or with GPIO and Ethernet slice was working well.
I now use libusb-win32-bin-1.2.6.0 and do not have problems with detection.
I now use libusb-win32-bin-1.2.6.0 and do not have problems with detection.
-
- Junior Member
- Posts: 4
- Joined: Tue May 12, 2015 10:29 pm
I have exactly same problem on Win7 SP1 64bits (with XTAG-2 & xCore-200 board using xTIME Composer Studio (Community_14.0.2))
Prerequisites:
XTAG-2 Win7 64bits "No Available Devices Found" Temporary Fix:xburn -l
Available XMOS Devices
----------------------
No Available Devices Found
Prerequisites:
- Install xTIME Composer Studio (Community_14.0.2) or other version ...
- Connect XTAG-2 to XSYS connector of the XMOS Board to debug then Power Up the XMOS Board to debug
- Launch "xTIME Composer Command Prompt (Community_14.0.2)" (will be used to launch command xburn -l ...)
- Connect XTAG-2 to PC USB
- xburn -l
Available XMOS Devices
----------------------
No Available Devices Found - Launch Zadig http://zadig.akeo.ie/
1) Options List All Devices
2) Choose XMOS XTAG-2
3) Choose libusb-win32 (v1.2.6.0)
4) Click on Reinstall Driver - xburn -l
Available XMOS Devices
----------------------
ID Name Adapter ID Devices
-- ---- ---------- -------
0 XMOS XTAG-2 DeBs67vq O[0]
Not sure if your issue is related to USB3 ports. But, have you tried the solution mentioned in the following link:
http://www.xcore.com/questions/2997/xta ... sb-3-ports
http://www.xcore.com/questions/2997/xta ... sb-3-ports
-
- Junior Member
- Posts: 4
- Joined: Tue May 12, 2015 10:29 pm
Thanks for that amazing hint
XMOS_XTAG_WINDOWS7_STARTUP_TIME with the value 500
Fix the problem here
XMOS_XTAG_WINDOWS7_STARTUP_TIME with the value 500
Fix the problem here
Good to know that the issue is fixed.bvx wrote:Thanks for that amazing hint
XMOS_XTAG_WINDOWS7_STARTUP_TIME with the value 500
Fix the problem here
Cheers.
-
- Member
- Posts: 13
- Joined: Mon Oct 09, 2023 9:45 pm
'No route found for "GET /questions/2997/xtag-issues-windows-7-64-bit-and-usb-3-ports"'Guest wrote: ↑Thu May 14, 2015 1:28 pm Not sure if your issue is related to USB3 ports. But, have you tried the solution mentioned in the following link:
http://www.xcore.com/questions/2997/xta ... sb-3-ports