Hello,
I have a technical question concerning a board that i currently manufacture with xs1-u8A-64-fb96.
I have connected the MODE2 and MODE3 pins to TRST_N pin of JTAG connector (XTAG2), for a 'Boot wait JTAG' mode
XFLASH does not work with error:
"Warning: according to mode pins, system is not set to boot from JTAG
xrun: First stage multi-node boot failed, please check XN file and Xmos link connectivity
Error: F03013 Failed to complete flash programming."
Maybe the MODE pins are not correctly soldered on my card....
Thanks,
mbrico
System is not set to boot from JTAG
-
- Junior Member
- Posts: 5
- Joined: Tue Dec 23, 2014 11:08 am
It is recommended to have MODE2 and MODE3 pins connected to MSEL pin. Have a look at the DJ Kit Schematics for your reference. You can find the design files from the following link:
https://www.xmos.com/support/boards?pro ... 4&secure=1
https://www.xmos.com/support/boards?pro ... 4&secure=1