Hi all, i've searched around and couldn't find an answer to my problem
I have a new XR-USB-AUDIO-2.0-MC reference design board. The USB Audio 2.0 MC Reference Design Quick Start guide says that the board comes with no installed firmware and gives instructions to download. The problem is that the file name at the directory they specify doesn't exist...
It says go to XMOS.COM -> MyXMOS -> Reference Designs -> USB Audio 2.0 Multichannel Reference Design and install the driver from the USB Audio 2.0 XS1-L2 Software Release link. That last link is not there.
As a result, xTIMEcomposer doesn't recognize that my board is plugged in and I can't do anything with the device.
Can someone point me in the right direction to get this thing started?
Thanks
New XR-USB-AUDIO-2.0-MC is a brick
-
MAC
- Member
- Posts: 8
- Joined: Wed Nov 19, 2014 4:12 am
-
sethu_jangala
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
If you go to MyXMOS --> reference Designs, You will see USB MULTI-CHANNEL AUDIO category. In that you can download the firmware from USB Audio 2.0 Device Software - source code and you can download the Windws driver from USB Audio Class 2.0 Evaluation Driver for Windows.
Flash the firmware on the board and install the driver in your machine (if you are using Windows machine) and plug the XMOS USB AUDIO reference design board into your machine and see if you are able get the board detected in your machine.
Flash the firmware on the board and install the driver in your machine (if you are using Windows machine) and plug the XMOS USB AUDIO reference design board into your machine and see if you are able get the board detected in your machine.