I was going through the Multi Function Audio Kit Hardware schematic and found that in the section "U8 I/O Support" on page 4, the pin X0D10 is connected to the SPI_SCK interface while on Page 1 , it is connected to I2C clock i.e SCL under the "U8 sheet connections" section.
Is there an error in my understanding or does it look like a potential typo/error?
Anybody knows which XMOS pin is connected to I2C SCL and SDA lines on the MFA kit?
Potential error in XMOS MFA Kit Schematic
-
amninder
- Member++
- Posts: 30
- Joined: Mon Dec 15, 2014 9:03 pm
-
padma
- New User
- Posts: 3
- Joined: Wed Oct 17, 2012 1:40 pm
Hi,
It's not an error. In order to maximize the functionality of the MFA platform all of the 1-bit ports used by the boot flash are also used by the system after boot. For more details refer the MultiFunction Audio Hardware Manual Page no 27 sec 4.4.
https://www.xmos.com/download/private/M ... %29.pdf?ac...
Padma
It's not an error. In order to maximize the functionality of the MFA platform all of the 1-bit ports used by the boot flash are also used by the system after boot. For more details refer the MultiFunction Audio Hardware Manual Page no 27 sec 4.4.
https://www.xmos.com/download/private/M ... %29.pdf?ac...
Padma