Version: 0.1
Status: Under development
License: Custom Licence
Download: http://solderpad.com/folknology/fluxslice/
FluxSlice is a dynamic hybrid motion controller module for the SliceKit system. It is capable of driving up to 4 stepper motor axis or 8 DC spindle motor axis. Stepper and DC spindle motors can also be mixed in pairs for any number fro 2 through to 8 as required by your application.Both steppers and DC motors have software defined chopper control to allow for a range of motor currents and types.
Images:
FluxSlice
- Folknology
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
- Contact:
- infiniteimprobability
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
- Contact:
Nice idea. Do you have the part number of the driver IC so I can check out the specs in the datasheet? I couldn't see it on the schematic.
Thanks
Thanks
- infiniteimprobability
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
- Contact:
- infiniteimprobability
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
- Contact: