MEMS oscillator
-
- XCore Addict
- Posts: 129
- Joined: Wed May 11, 2016 3:50 pm
MEMS oscillator
I'm looking to cut down a board I have and I have 0 experience with MEMS oscillators but from the looks of it I can essentially supply most of them power, ground, decouple it and I get my clock signal I can feed right to the CPU with a very small area taken up for the clock. Is there something I'm missing, will this work fine for a 200 series processor? I've typically used a pierce-gate clock circuit and I'm not seeing a reason to not switch over.
-
- XCore Expert
- Posts: 754
- Joined: Thu Dec 10, 2009 6:56 pm
I have some prototypes here with ASTMLPE-25.000MHZ-EJ-E-T and ASFLMB-24.000MHZ-LY-T without problems.
MEMS oscillators do draw more current than regular crystal oscillators in general but they should also be a bit more affordable.
MEMS oscillators do draw more current than regular crystal oscillators in general but they should also be a bit more affordable.
-
- XCore Addict
- Posts: 129
- Joined: Wed May 11, 2016 3:50 pm
Excellent! The 24mhz abracon is on my short list so that's good to know.
-
- XCore Expert
- Posts: 580
- Joined: Thu Nov 26, 2015 11:47 pm
We use DSC1001CI5-024.0000 and it works as expected. They are more reliable than quartz, so that's a benefit even though they draw more power.
-
- XCore Addict
- Posts: 129
- Joined: Wed May 11, 2016 3:50 pm
Just as a follow up. I decided to check stability and check specs between a pierce clock using ABLS7M2-24.000MHZ-D-2Y-T and DSC1001AL5-024.0000 after hearing they work well. Probably use a smaller footprint of the MEMS clock for final board but for proto the large package is easier. The difference between the images is time/div from 20uS down to about 10nS. They all showed that the MEMS was more stable overall but sort of expected compared to a 20ppm freq. tol./30ppm temp. tol. crystal circuit. For the price and small footprint I'm pretty happy with it. Probing wasn't ideal in either case but it was the same for both, running from same 3.3v power supply. Also for the 10nS/div the temperature changed about 10* C.

Large timebase - 20uS

Medium timebase - 40nS

Small timebase - 10nS

Large timebase - 20uS

Medium timebase - 40nS

Small timebase - 10nS