I just got an xCORE-200 eXplorer board. I have xTIMEcomposer (v. 14.3.3) installed on Mac OS.
I downloaded AN00155_explorer_gpio and lib_gpio (v. 1.1.0). I'm not sure if it has to be added/installed to AN00155 before building, etc.
I have tried to build it (by clicking on the Hammer icon) and it seem fine. The build console shows:
However when I try to run it on my board (by clicking the Lightning Bolt icon) I get the following message:
Code: Select all
16:14:42 **** Incremental Build of configuration Default for project AN00155_explorer_gpio **** xmake CONFIG=Default all Checking build modules Using build modules: lib_gpio(1.1.0) lib_xassert(3.0.0) xmake: `bin//app_simple_gpio_demo.xe' is up to date. Build Complete 16:14:43 Build Finished (took 697ms)
https://www.icloud.com/iclouddrive/0gjK ... urred.jpeg
I wish there were a detailed step by step tutorial explaining how to go from connecting the board to running a demo project.
If they make such a guide or tutorial they should pin it to the top of the forum so the question is asked less often.