Also I found this topic. It may be related since i'm also using Mac OS.
http://www.xcore.com/viewtopic.php?f=47&t=6362
xCORE-200 eXplorerKIT: Unable to run examples
-
MisterHemi
- Member
- Posts: 12
- Joined: Tue Jun 19, 2018 1:21 am
-
MisterHemi
- Member
- Posts: 12
- Joined: Tue Jun 19, 2018 1:21 am
Ok I figured it out. It was just user error, having come from using Microchip's tools things are a bit different.
In xTIMEcomposer you use: RUN > RUN AS > 1 xCORE Application
Whereas in MPLAB you'd click on the icon with the square and down arrow (Make and Program Device Project)
I had assumed the lightening bolt icon (Launch app ....) would upload the firmware to the board.
Hopefully this will be helpful to someone.
In xTIMEcomposer you use: RUN > RUN AS > 1 xCORE Application
Whereas in MPLAB you'd click on the icon with the square and down arrow (Make and Program Device Project)
I had assumed the lightening bolt icon (Launch app ....) would upload the firmware to the board.
Hopefully this will be helpful to someone.