XTAG3 issue

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
lmariotti
Member++
Posts: 27
Joined: Mon Nov 21, 2022 5:38 pm

XTAG3 issue

Post by lmariotti »

I've recently purchased an xcore-200 eXplorer kit and I'm trying to run the AN00155_explorer_gpio but I'm having constantly Error: F03136 No devices attached - Cannot run the enquirer until a device is found

From XTC Tools:
ID Name Adapter ID Devices
-- ---- ---------- -------
0 XMOS XTAG-3 SU3MGNRT O[0]

Here my specs:
  • windows10 x64
  • xTime Composer Studio Version: Community_14.4.1 (build 235-acbb966, Dec-01-2019)
  • XTC Tools 15.1.4
Here my connections:
Image

How can I fix this?

Thanks for your support.
You do not have the required permissions to view the files attached to this post.
User avatar
pangdi
Member
Posts: 11
Joined: Tue Nov 15, 2022 9:58 am

Post by pangdi »

You can change the platform to vm machine to give it a try.
User avatar
CousinItt
Respected Member
Posts: 367
Joined: Wed May 31, 2017 6:55 pm

Post by CousinItt »

Your laptop may not be providing enough current to power the board, even though the LED is lit. Do you have a suitable 5V supply you can use instead?
lmariotti
Member++
Posts: 27
Joined: Mon Nov 21, 2022 5:38 pm

Post by lmariotti »

pangdi wrote: Tue Nov 22, 2022 3:48 am You can change the platform to vm machine to give it a try.
I've tried with a vm machine and also with a Win7 x64 pc but nothing changed;
CousinItt wrote: Tue Nov 22, 2022 12:34 pm Your laptop may not be providing enough current to power the board, even though the LED is lit. Do you have a suitable 5V supply you can use instead?
Also plugghing the device in a AC/DC 5V phone charger the problem still occour;
User avatar
pangdi
Member
Posts: 11
Joined: Tue Nov 15, 2022 9:58 am

Post by pangdi »

You can change the win10 system and it maybe well.
User avatar
Ross
Verified
XCore Legend
Posts: 1117
Joined: Thu Dec 10, 2009 9:20 pm
Location: Bristol, UK

Post by Ross »

The command prompt screenshot is for v14 tools. What about v15 tools?
Technical Director @ XMOS. Opinions expressed are my own
lmariotti
Member++
Posts: 27
Joined: Mon Nov 21, 2022 5:38 pm

Post by lmariotti »

Ross wrote: Wed Nov 23, 2022 3:36 pm The command prompt screenshot is for v14 tools. What about v15 tools?
With XTC Tools 15.1.4 windows assign to xTAG3 the winusb.sys drivers instead of libusb0.sys (as suggested from XMOS support), anyway I gaved it a shot:
Image

Sometimes after some plug in and out and some diver re-install I'm able to get at the same condition also with v14.4.1 tools:
Image

but in many cases if I run the xrun -l command many times in a row the device is detected only first time, each successive execution result in No Available Devices Found (even if from windows device manager everything seems to be ok) and keep running the xrun -l doesn't fix this;
You do not have the required permissions to view the files attached to this post.
lmariotti
Member++
Posts: 27
Joined: Mon Nov 21, 2022 5:38 pm

Post by lmariotti »

Update: As soon as I plug in the xTAG3 I'm able to run the xflash command (v14 tools) but I'm always getting the error: F03013

Full log:

Image
You do not have the required permissions to view the files attached to this post.