If have just registered and have a few questions.
Before I buy I board I would like to know something about the communication.
How can I communicate from the IDE on the PC with the board ?
Is there text output or a graphical output from the board to the IDE on the PC ?
Can I connect a monitor or a keyboard to the board ?
Communication between IDE and board ?
-
- Member
- Posts: 8
- Joined: Mon Jun 13, 2011 9:51 pm
-
- Respected Member
- Posts: 363
- Joined: Thu Dec 10, 2009 10:17 pm
Well there are commands that let you debug print in to a console or you can use the XTAGs built in UART interface. As far as i know only the expensive XDK kit has a connector for a PS/2 keyboard
What board you got?
What board you got?
-
- Member
- Posts: 8
- Joined: Mon Jun 13, 2011 9:51 pm
Till now, I have no board.
I was surfing for the Arduino, found the Netduino (.NET Micro Framwork, Programmable in C# using Microsoft Visual Express), the chipKIT form Microchip and at last the XCom or XCore.
I looking for a flexible, easy to program but powerful solution for some small projects.
The IDE should be free or available at a small budget.
At the moment I'm wondering what are the differences in programming the XCore boards in C or XC.
You already answered to my second post concerning programming.
So I can use floating point programming in C not in XC.
Well I suppose you can mix C and XC programming.
I was surfing for the Arduino, found the Netduino (.NET Micro Framwork, Programmable in C# using Microsoft Visual Express), the chipKIT form Microchip and at last the XCom or XCore.
I looking for a flexible, easy to program but powerful solution for some small projects.
The IDE should be free or available at a small budget.
At the moment I'm wondering what are the differences in programming the XCore boards in C or XC.
You already answered to my second post concerning programming.
So I can use floating point programming in C not in XC.
Well I suppose you can mix C and XC programming.
-
- Active Member
- Posts: 61
- Joined: Sat May 28, 2011 9:42 pm
- Location: England
Is it IDE in particular you want to use for communicating with the board? The XC-1A I use has a USB connection which is used for programming the board & can be used for communication with running programs I believe. If you want IDE specifically I _think_ you should be able to hook a board up provided you look up all the pin-outs & program accordingly.
There is a group on xcore.com who are interested in video output on Xmos boards, a link to the group is below.
https://www.xcore.com/groups/xmos-video ... group-xvig
Hope this helps.
There is a group on xcore.com who are interested in video output on Xmos boards, a link to the group is below.
https://www.xcore.com/groups/xmos-video ... group-xvig
Hope this helps.
"Time is an illusion. Lunch-time doubly so." - Douglas Adams
-
- Member
- Posts: 8
- Joined: Mon Jun 13, 2011 9:51 pm
The XC-1A I use has a USB connection which is used for programming the board & can be used for communication with running programs I believe.
So there is no VGA interface or keyboard interface ?
Well the question is: Can I use a XCore board as a standalone solution without a PC ?
Simple Example: Parse and reformat a NMEA string from a GPS device.
Connect a LCD and maybe a card writer for that.
I want to program the board not to chance the hardware.
So there is no VGA interface or keyboard interface ?
Well the question is: Can I use a XCore board as a standalone solution without a PC ?
Simple Example: Parse and reformat a NMEA string from a GPS device.
Connect a LCD and maybe a card writer for that.
I want to program the board not to chance the hardware.
-
- Active Member
- Posts: 61
- Joined: Sat May 28, 2011 9:42 pm
- Location: England
No, no VGA or keyboard interface. Not unless you add them on.
I don't see why you wouldn't be able to do what you're asking, there are a few projects which already use LCD screens on the Xmos this is one example, string parsing you'd have to work out & Berni is using SD storage for his audio player.
You'll just need to program it to do what you need.
Edit:
I don't see why you wouldn't be able to do what you're asking, there are a few projects which already use LCD screens on the Xmos this is one example, string parsing you'd have to work out & Berni is using SD storage for his audio player.
You'll just need to program it to do what you need.
Edit:
You should be able to use it exactly like you would an Arduino, provide power & have it programmed already & it should stand up by itself.HansWerner wrote: Well the question is: Can I use a XCore board as a standalone solution without a PC ?
"Time is an illusion. Lunch-time doubly so." - Douglas Adams