Link choice with XE216-512-TQ128

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm

Link choice with XE216-512-TQ128

Post by Folknology »

I would like to use xConnect XL3 for xscope, is it possible to use XL3 and USB on concurrently on tile [1] ?

regards
Al
Top
User avatar
infiniteimprobability
Verified
XCore Legend
Posts: 1180
Joined: Thu May 27, 2010 10:08 am

Post by infiniteimprobability »

Yes that's fine. The pin muxing for ports vs links happens closest to the pin. What happens deeper inside the chip (ie. connection of ports to the USB PHY) is a don't care in this case.
Top
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm

Post by Folknology »

Excellent I was hoping this was the case, now I can move ahead with my evil plan ;-)
Top
User avatar
infiniteimprobability
Verified
XCore Legend
Posts: 1180
Joined: Thu May 27, 2010 10:08 am

Post by infiniteimprobability »

now I can move ahead with my evil plan
...Hmm USB connect evil plan

Something like this except scaled up? http://www.thinkgeek.com/product/8a0f/
Top
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm

Post by Folknology »

infiniteimprobability wrote:
now I can move ahead with my evil plan
...Hmm USB connect evil plan

Something like this except scaled up? http://www.thinkgeek.com/product/8a0f/
I seem to recall some USB missile firing action at the last Xmos hack session..

BTW We really should have another Xmos hack session soon with the new 200 series featured
Top

Return to “XMOS Devices”