Hi there,
I'm using the xCORE 200 Multichannel board (which is amazingly awesome!). My question is this: does AVB put any special requirements on the ethernet PHY? We have concerns that obtaining the current might be difficult (it's a Qualcomm part), so we'd prefer to design with a part that's more accessible for our custom board.
What other known working PHYs are there?
Thanks,
-Caleb
Ethernet PHY Requirements for AVB
-
ccrome
- Active Member
- Posts: 62
- Joined: Wed Sep 23, 2015 1:15 am
-
henkVerified
- Respected Member
- Posts: 347
- Joined: Wed Jan 27, 2016 5:21 pm
It is supposed to work with any RGMII PHY.
You could for example try the Micrel one <http://ww1.microchip.com/downloads/en/D ... 031RNX.pdf>
You could for example try the Micrel one <http://ww1.microchip.com/downloads/en/D ... 031RNX.pdf>
-
ccrome
- Active Member
- Posts: 62
- Joined: Wed Sep 23, 2015 1:15 am
Great, thanks. After a bit of inspection, that's what I suspected, but definitely good to get some confirmation.henk wrote:It is supposed to work with any RGMII PHY.
You could for example try the Micrel one <http://ww1.microchip.com/downloads/en/D ... 031RNX.pdf>
-Caleb