I am having a setup with a 8 channel XMOS Talker and 4 Daisy Chain Boards, which can receive 4 channels only with the standard firmware. I am wondering if it is possible to make the daisy chain boards receive the full 8 channels of the talker or at least choose which 4 of the 8 channels to receive and playout by editing the firmware. I dont need talker functionality for the daisy chain boards.
Does anyone have experience with that?
XMOS Daisy Chain Board receive 8 Channels
-
- Member
- Posts: 15
- Joined: Thu May 19, 2016 1:18 pm
-
- Respected Member
- Posts: 275
- Joined: Fri Mar 12, 2010 6:03 pm
If you can find 4 unused 1bit ports, you should be able to just increase the channel count from 4 to 8 in the XMOS DC software and assign the unused ports to the channels you don't want brought out to physical DAC.
-
- Active Member
- Posts: 39
- Joined: Sat May 09, 2020 4:20 pm
Channel selection is one of the things that was not specified by AVB back then. Now it got specified by the Milan specifications.