Provide access to necessary files for the designing of custom boards.
Read
Custom XMOS Boards
-
rp181
- Respected Member
- Posts: 395
- Joined: Tue May 18, 2010 12:25 am
-
rp181
- Respected Member
- Posts: 395
- Joined: Tue May 18, 2010 12:25 am
Made this group to maintain files good to have to make boards. I know i made some, will find and upload.
-
rp181
- Respected Member
- Posts: 395
- Joined: Tue May 18, 2010 12:25 am
-
rp181
- Respected Member
- Posts: 395
- Joined: Tue May 18, 2010 12:25 am
144 BGA for the G4 eagle library as well as others. Unchecked.
http://xcore.com/forum/download/file.php?id=246
taken from this thread: http://xcore.com/forum/viewtopic.php?f=7&t=135&start=30
XS!-L2-124QFN footprint: http://www.leonheller.com/XMOS/XS1-L2-124QFN%20(BO).gif
http://xcore.com/forum/download/file.php?id=246
taken from this thread: http://xcore.com/forum/viewtopic.php?f=7&t=135&start=30
XS!-L2-124QFN footprint: http://www.leonheller.com/XMOS/XS1-L2-124QFN%20(BO).gif
-
rp181
- Respected Member
- Posts: 395
- Joined: Tue May 18, 2010 12:25 am
Started the wiki page. Feel free to add!
-
lilltroll
- XCore Expert
- Posts: 956
- Joined: Fri Dec 11, 2009 3:53 am
- Location: Sweden, Eskilstuna
Many people have done some L1 board's, but isn't there any custom made board for the QFN or BGA IC's yet ??
In general people seems to want's USB2.0 connection /Ethernet, SDRAM connection, and I/O to some device.
In general people seems to want's USB2.0 connection /Ethernet, SDRAM connection, and I/O to some device.
Probably not the most confused programmer anymore on the XCORE forum.
-
Vaati
- Active Member
- Posts: 39
- Joined: Sat Dec 25, 2010 7:09 pm
Is there a library for the G4 BGA 512? I would like to avoid creating the part from scratch if someone else has already done so...
Thanks
Thanks
-
russf
- XCore Addict
- Posts: 146
- Joined: Thu Dec 10, 2009 10:17 pm
Today I published our first library, containing two XMOS XS1-L1 variants (64,128). Look at the project for a link to the github repo.
I also have a second repo that has a general set of components I'm using, and also a library called xmossupport, which contains parts found on some of the XMOS reference designs. https://github.com/topiaruss/KiCad-Parts
Good luck. Pull requests encouraged.
--r
I also have a second repo that has a general set of components I'm using, and also a library called xmossupport, which contains parts found on some of the XMOS reference designs. https://github.com/topiaruss/KiCad-Parts
Good luck. Pull requests encouraged.
--r
-
narutoxela
- Active Member
- Posts: 46
- Joined: Wed Apr 20, 2011 9:30 pm
Hi everyone, I'm here to announce that I finished a library for Eagle CAD including all the xmos chips currently available. It is available on the projects page.