Hi Guys,
I have purchased XMOS U8 USB card to connect to my AK4495 DAC board that has 7-pins in it. Now the problem is that the XMOS USB module I have purchased from China has two rows of connectors, can anyone help as to how should I connect it in order to match the 7-pins on the DAC board.
Image link is here: XMOS USB 2 Cards https://photos.app.goo.gl/STeczWvW4KSBP2Jn1
SPDF
GND
DSD
MCK
LRCK
BCK
DATA
Where should I connect FSCLK , SPDIF and 3.3V?
And here: https://photos.app.goo.gl/wQm9ByxItKEwd6if1
Many Thanks
XMOS U8 USB Module
-
- Newbie
- Posts: 1
- Joined: Mon Oct 16, 2017 11:17 pm
-
- Newbie
- Posts: 1
- Joined: Fri Aug 25, 2017 4:16 pm
Hello,
Please connect the FSCLK to LRCK. Leave the 3.3V unconnected and first try leaving the SPDIF unconnected as well. If that doesn't connect SPDIF to SPDF and try again.
Please connect the FSCLK to LRCK. Leave the 3.3V unconnected and first try leaving the SPDIF unconnected as well. If that doesn't connect SPDIF to SPDF and try again.
-
Verified
- XCore Legend
- Posts: 1117
- Joined: Thu Dec 10, 2009 9:20 pm
- Location: Bristol, UK
You really need to contact the manufacturer of the board for support on this issue.
Technical Director @ XMOS. Opinions expressed are my own