Custom board USB-Audio 2.0 device sample rate error

Sub forums for various specialist XMOS applications. e.g. USB audio, motor control and robotics.
New User
Posts: 2
Joined: Fri Feb 01, 2019 11:11 pm

Custom board USB-Audio 2.0 device sample rate error

Postby willem_vdk » Sun Feb 17, 2019 12:32 pm


I have been trying to convert the app_usb_aud_xk_216_mc example code to a custom project for a custom board so the code is a bit easier to read, the reason for this is that it has te be maintained by different students after i am done with college and we don't use xmos microcontrollers that often. I have started with implementing the USB framework for the USB-Audiocard running linux (ubuntu bionic beaver) since i am only interested in the audio 2.0 standard and linux has native support. When starting the program the output for "dmesg -Hw" shows the device is being recognized and enumerated correctly, but when the class specific requests start it gives an error for the clock "parse_audio_format_rates_v2(): unable to find clock source (clock -110)" and than twice the error "parse_audio_format_rates_v2(): unable to find clock source (clock -71)" . When i look at the settings of stream0 the rates are blank meaning there are none.

My understanding of the matter is that the host requests the device for the supported sample rates through a class specific request which is in AudioClassRequests_2() in the RANGE case.
Does anyone have expirience with this issue?

Thanks in advance,
Willem van der Kooij

Who is online

Users browsing this forum: No registered users and 1 guest