Hi,
I'm trying to read AT25FF081A-SSHN-B external flash chip data connected to a XE216-512-TQ128-C20 based design to a file using the following commands.
1.
xflash --target=xk-audio-216-mc --read-all -o out.bin --verbose
and receive this message
XFlash::DoXFlash
Error: F03089 When multiple upgrade images and no global factory image is specified a target must be specified with --target.
I have also tried
2.
xflash --target=xk-audio-216-mc --read-all -o out.bin --target-file xk-audio-216-mc.xn --verbose
and receive this message
XFlash::DoXFlash
xk-audio-216-mc.xn:10 Error: XN11099 Package type "XS2-UnA-512-FB236" cannot be resolved to a package file.
see attached xk-audio-216-mc.xn file
Any help will be greatly appreciated
Flashing from xTimeComposer works but I need to read and verify flash content.
I am on Windows 10 and xTimeComposer 14.4.1
Kind regards
Error: F03089 When multiple upgrade images and no global factory image is specified a target must be specified with --ta
-
- Member
- Posts: 14
- Joined: Mon Feb 25, 2019 3:05 pm
Error: F03089 When multiple upgrade images and no global factory image is specified a target must be specified with --ta
You do not have the required permissions to view the files attached to this post.
-
- XCore Addict
- Posts: 134
- Joined: Fri Jul 05, 2013 5:55 pm
Your target and too file xn isnt ok for XE216-512-TQ128-C20
And use only target-file in commands.
And use only target-file in commands.
-
- Member
- Posts: 14
- Joined: Mon Feb 25, 2019 3:05 pm
Where can I find the correct package type to use in .xn file for XE216 chip?
Looked at https://www.xmos.ai/documentation/XM-01 ... ml#package but no reference to XE216
Looked at https://www.xmos.ai/documentation/XM-01 ... ml#package but no reference to XE216
-
- XCore Addict
- Posts: 134
- Joined: Fri Jul 05, 2013 5:55 pm
Look into xTimeComposer 14.4.1 folders