Hi,
i just downloaded composer studio to my win8.1 PC and i have difficulties making it work.
First of all, the created shortcut doesn't do anything. I checked the path to it, found the .bat file, checked the contents and tried to work around it.
Obviously, SetEnv.bat is important as it sets the environment variables. Or it is supposed to do so. If i execute it, my cmd opens and closes immediately. Also i tried copypastaing the commands in SetEnv.bat manually into my cmd. No errors, but also no success.
When i launch the xtimecomposer.exe, eclipse starts up, but notifies me about not being able to find the libraries. Of course, because SetEnv.bat fails. If i click on OK, it just starts up, but i assume it is not really usable then.
Other than that there are no error messages. I even tried to run the .bats as administrator, no change.
Can anyone provide any help on that?
Composer Studio won't start on win8.1, SetEnv.bat fails
-
- Member
- Posts: 8
- Joined: Mon Dec 23, 2013 2:37 pm
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
can you send the error you are seeing when you try opening the tool?
Sethu.
Sethu.
-
- Member
- Posts: 8
- Joined: Mon Dec 23, 2013 2:37 pm
It says this:
And the next error is:
Code: Select all
The xTIMEcomposer was unable to locate the XMOS toolchain binaries
Please ensure you have set up you environment correctly by running the SetEnv
script in the installation directory prior to starting the xTIMEcomposer.
Code: Select all
The following require environment variables are not set:
- XCC_TARGET_PATH
- XCC_DEVICE_PATH
- XMOS_CACHE_PATH
- XMOS_REPO_PATH
- XMOS_DOC_PATH
Please ensure you have set up you environment correctly by running the SetEnv
script in the installation directory prior to starting the xTIMEcomposer.
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
This looks like SetEnv.bat file is not running. Can you try running the SetEnv script manually before opening the tool and see if this fixes your problem?
Sethu.
Sethu.
-
- Member
- Posts: 8
- Joined: Mon Dec 23, 2013 2:37 pm
Did all the manual magic already. Even took the commands out of the SetEnv.bat and pasted them into CMD. No joy.
-
- Member
- Posts: 8
- Joined: Mon Dec 23, 2013 2:37 pm
I just checked my PATH and it's all there.
All the paths are set.
Though some variables point to places that don't exist.
All the paths are set.
Though some variables point to places that don't exist.
-
- Member
- Posts: 8
- Joined: Mon Dec 23, 2013 2:37 pm
So, anyone else got any ideas?
I tried it out on my Ubuntu notebook and it fails there, too.
It just crashes there.
This means i have pretty much no working IDE for my startKIT :(
I tried it out on my Ubuntu notebook and it fails there, too.
It just crashes there.
This means i have pretty much no working IDE for my startKIT :(