I couldn't find valid voltage of USB_VBUS in XU208-256-TQ64 data sheet. Generally, USB VBUS is 5.0V. If USB_VBUS is provided 3.3V, does xCORE work fine?
Thanks.
USB_VBUS pin on XU208-256-TQ64 Topic is solved
-
- Member++
- Posts: 28
- Joined: Tue Jan 07, 2014 7:49 am
-
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
I'm afraid not. This pin needs at least 4.4V to register valid VBUS. This is needed to trip a comparator inside the chip and enable some of the USB logic.If USB_VBUS is provided 3.3V does xCORE work fine?