I have no trouble doing this with a board that has the XLink connected to XL0 on tile 0, using the following lines:
Code: Select all
<Nodes>
<Node Id="2" Type="device:" RoutingId="0x8000">
<Service Id="0" Proto="xscope_host_data(chanend c);">
<Chanend Identifier="c" end="3"/>
</Service>
</Node>
</Nodes>
<Links>
<Link Encoding="2wire" Delays="4,4" Flags="XSCOPE">
<LinkEndpoint NodeId="0" Link="XL0"/>
<LinkEndpoint NodeId="2" Chanend="1"/>
</Link>
</Links>
Any suggestions welcome.
Cheers!