Further to my post above, there seems to be another similar inconsistency:
In the first table, you list:
X1D5 goes to pin B11 on the Square Port
X1D3 goes to pin B7 on the Square Port
However, in the Square Port table, you list:
B7 connects to X1D3 ( same as the top table )
as well as:
B11 connects to X1D3 ( different to the top table )
Again, at a guess, the square table listing for B11 is incorrect and should say:
B11 connects to X1D5
But confirmation would be appreciated.....
And another inconsistency...
-
- Member
- Posts: 11
- Joined: Thu Jan 07, 2010 1:56 am