Hello. I've got one of these:
http://www.sparkfun.com/commerce/produc ... ts_id=8739
It outputs (RCA) video. I'm going to need an ADC to connect it to the XMOS chip, right? Not sure what I want to do with the data yet, but would like some advice on which to use.
Thanks for help!
SparkFun CMOS Camera Module
-
jonathan
- Respected Member
- Posts: 377
- Joined: Thu Dec 10, 2009 6:07 pm
-
leon_heller
- XCore Expert
- Posts: 546
- Joined: Thu Dec 10, 2009 10:41 pm
- Location: St. Leonards-on-Sea, E. Sussex, UK.
I've got a couple of these:
http://www.sparkfun.com/commerce/produc ... ts_id=8667
Some people have got them working with other MCUs.
Your camera will be quite difficult to interface, you will need a fast ADC to digitise the video signal, although you could capture single frames quite easily with a slow ADC. You will also need to extract the sync pulses.
http://www.sparkfun.com/commerce/produc ... ts_id=8667
Some people have got them working with other MCUs.
Your camera will be quite difficult to interface, you will need a fast ADC to digitise the video signal, although you could capture single frames quite easily with a slow ADC. You will also need to extract the sync pulses.